PD-MCC&G400A
is an on-line Partial Discharge (PD) diagnostic system, which
detects and analyzes the generation of PD in the power equipments
such as Cable and Motor. Four High Frequency Current Transducer
(HFCT) Sensors are installed ground line in power equipments
to detect PD signals. PD-MCC&G400A PD-MCC&G400A is an
on-line Partial Discharge (PD) diagnostic system that detects
and analyzes the generation of PD in cables and motors. The
PD-MCC&G400A uses four High Frequency Current Transducers (HFCT),
which are installed on the shield grounds of cables and case
grounds of a motor. The HFCT senses any electrical discharge
(PD) in the ground path and captures this signal. The PD-MCC&G400A,
has the ability of linking up to 32 units by using a RS-485.
The software developed by PowerPD allows instant access to the
data from your office via a modem and a RS-485. All PD data
is transmitted in real-time.
Features
PD-MCC&G400A provides an early warning signal for potential failures that will result in lost equipment and revenue
Continuously monitors and detects fault conditions of cables and motors
Reduces maintenance costs and the likelihood of unexpected power failure
Enables maintenance managers to manage risk and avoid costly damage to adjacent equipment
PD-MCC&G400A
is an on-line Partial Discharge (PD) diagnostic system, which
detects and analyzes the generation of PD in the power equipments
such as Cable and Motor. Four High Frequency Current Transducer
(HFCT) Sensors are installed ground line in power equipments
to detect PD signals. PD-MCC&G400A PD-MCC&G400A is an
on-line Partial Discharge (PD) diagnostic system that detects
and analyzes the generation of PD in cables and motors. The
PD-MCC&G400A uses four High Frequency Current Transducers (HFCT),
which are installed on the shield grounds of cables and case
grounds of a motor. The HFCT senses any electrical discharge
(PD) in the ground path and captures this signal. The PD-MCC&G400A,
has the ability of linking up to 32 units by using a RS-485.
The software developed by PowerPD allows instant access to the
data from your office via a modem and a RS-485. All PD data
is transmitted in real-time. 
